Installation and Setup
After receiving the package, please refer to the following instructions to install and troubleshoot.

Deeper Connect Device Setup Options
A. Standalone Modem (a device with a thin yellow wire plugged into the back of the device) and Router:Find the Ethernet cable that connects from your modem (usually from the Internet port) to the WAN port of your router, unplug it from the router’s WAN port and connect it into either one of the Ethernet ports on the Deeper Connect device. Connect another ethernet cable from the remaining Ethernet port on the Deeper Connect device to the WAN port of your router.
B. Integrated Modem/Router All-in-one device: A separate standalone router is required. Connect an Ethernet cable from the LAN port (internet port) of the Integrated Modem/Router All-in-one device to either one of the Ethernet ports on the Deeper Connect device. Connect another Ethernet cable from the remaining Ethernet port on Deeper Connect to the WAN port of your separate router in order to connect to the network via the new WiFi router.
C. When you’re traveling and cannot bring a router with you (ex. Hotel): Connect an Ethernet cable from the hotel’s internet port to the Deeper Connect device, and connect another Ethernet cable from the Deeper Connect device to the network socket of your laptop computer. (This method is only applicable to laptop computers with Ethernet ports, or to be used with a USB to Ethernet adapter)
Last modified 1yr ago